READYbright™ Wood Brightener
Step-by-Step Instructions

DESCRIPTION

READYbright Wood Brightener is a concentrate formula engineered to brighten wood and neutralize READYremove™ Wood Stripper and READYclean™ Wood Cleaner. It is also effective at removing tannins and mill glaze, opening wood grain, and restoring the natural color of wood prior to staining, including the color tint on pressure- treated wood.

PREPARATION

Protect nearby surfaces and vegetation from over-spray or run-off by wetting down and/or covering prior to cleaning with READYbright. Pre-wet surfaces to be treated, and make sure they are free of debris. NOTE: Test for concentration level in an inconspicuous area before use. CAUTION: DO NOT MIX WITH BLEACH. AVOID CONTACT WITH METAL SURFACES.

APPLICATION

Once nearby area is prepped, pre-wet, and desired neutralization strength is determined, apply READYbright liberally to surface in a uniform manner using a pump sprayer (without aluminum parts), mop, brush, or roller. Allow solution to dry on the wood. Once product has dried to a powdery finish, remove residue from wood surface by thoroughly rinsing in the direction of the wood grain with a garden hose or a power washer on a low pressure setting (1000 PSI or less), being careful not to damage the wood. Results may vary based on age or condition of wood. If necessary, repeat process and/or increase dilution strength until desired results are achieved. One gallon of dilution mixture covers approx. 200 sq. ft. Allow wood to dry thoroughly (12% moisture or less) before applying READY SEAL® Exterior Wood Stain.