What is READY SEAL®?

"Ready Seal®" is an oil based semi-transparent sealer and stain in one. It is a unique blend of resin, pigment, oil, and algicide that penetrates deeply into wood to protect and preserve it from the elements. "Ready Seal®" can be used on all types of wood. "Ready Seal®" contains trans-oxide pigment that acts as the UV protection. The trans-oxide pigment help protect your wood from fading and graying. Darker colors provide more UV protection. To properly maintain wood, a light cleaning and re-coat is recommended every two years on horizontal surfaces and every 3 to 4 years on vertical surfaces. Variances in the product longevity may be caused by original surface condition, application of product, and geographic location. "Ready Seal®" is intended for exterior wood surfaces only.

Surface Preparation
l Surface must be clean of mildew, dust, dirt, oil and grease. WE RECOMMEND APPLYING ONE PART BLEACH AND THREE PARTS WATER.
l All previous stains and sealers must be completely removed.
l Caustic strippers must be neutralized throughly.
l Rinse throughly. Before staining, wood must dry completely for 48 hours or more depending on weather conditions.
l Protect against overspray and cover all plants and vegetation with plastic drop cloth before applying "Ready Seal®".
Application Instructions
l Before treating wood, test in a small inconspicuous area to ensure that you are satisfied with the appearance.
l Use a Brush, Roller, Pump-up Sprayer or Airless Sprayer to apply.
l Apply two light coats of "Ready Seal®" to wood surface. Allow at least 45 minutes between coats.
l Allow 48 hours to 72 hours of drying. Drying will vary depending on temperature, porosity of surface, and humidity.
l "Ready Seal®" will not be affected by rain one hour after application.
l Clean equipment immediately with paint thinner or mineral spirits.
l For disposal of empty containers and unused stain contact your household refuse collection service.